This lightly used Surfcorder SE-1200 instrument  is complete with a granite base size 24" x 12" and carries a guarantee of 6 months with a 12 month option.

Measuring small  precision  parts and looking for a bench mounted optical comparator, here is a range of metrology instruments which may more than likely will meet your requirements and your budget.. 

Carmars Pv series of 300mm screen comparators has been developed to provide instruments to meet most requirements.   With 9 models in the range the user can choose between the basic low cost  Pv3015 or select the advanced Pv3025CE. Many configerations are offered not usually available on competative instruments, such as reverse or erect images, larger workstages with improved travel and enhanced accuracy when required.  All have geometric digital readout analysers as standard with simple software to connect direct to a PC if required.

Contact our company for more information, you will be surprised at the keen prices we are able to offer you if you purchase from our information provided via our website.

When it comes to measuring surfaces for roughness or contour profile the Kosaka Surfcorder SE-1200 instruments has no equal.  Consisting of a combined amplifier printer with a 25mm drive unit and universal pick-up this small compact instrument can carry out many measurements which larger competitive models are needed, such as curved surfaces, short lands, profiles  and very small bores.  Easily programmed via its keypad, selections of traverse distance, cut offs, curved, flat surface, vertical and horizontal magnifications and universal Ra and waveform parameters are quickly set, results witrh  profile graphs being rapidly printed out.  The SE-1200 is shown below with it pick-up  mouinted in a right angle format.

When  measurement of splines on shafts is required the Comtorgage hand held spline gauge is an ideal solution without compromising accuracy,  indeed these gauges excel over most other available solutions.   The Gauge itself comprises a substantial gauging anvil fitted with precison floating rollers, a mechanical or digital amplier and a setting  master. The self seating aspect of the gauge makes it easy to operate and ensures  high R&R results.

The picture above shows the gauge fitted with the 'world renown' Comtor mechanical amplifier

S-T Industries catalogue comprehensively covers the range of hand gauges and tools used in general the engineering and allied industries. The small bore diameter gauge shown below may be supplied to measure bores down to 100/150mm  in dia. ranges.: 10 to 18 /18  to 35/35 to 60/50 to 100/ 50 to150mm with imperial equivalents.

Shown here is a small bore comparator which, using a range of small add-on anvil tips measures between 10 and 18mm diameters. measures bores

Metrology International also supply an extensive  range of hand held instruments for general workshop quality control. All types of  micrometers,  calipers,  thickness  and slips  gauges are available direct from the manufacturers.  Here is a selection of instruments readily available at far lower prices than you will pay via your local tool merchant.